Hey guys this is my first tpost on this forum and im looking for some help. Ive got a kawasaki mule that im turning into a truggy. So far ive got the motor in and everything running. My only thing left to do is put on the sprockets. The gear ratio in the trans is 10:1 and 20:1 for high and low. I talked to a few other people on some other forums and they said I should try a 15tooth sprocket on the 2 speed trans shaft and a 15 tooth shaft on the motor/trans. I was wanting to get some other peoples ideas and thoughts on this. So if you have any ideas please let me know. Here is a pic of the trans before I got the motor in. I will get some more up to date pics tommarow to post up. I have a carrier bearing (pillow block) on the input shaft of the trans to help hold it still and not flex. I was wondering if any of the other guys on here had any experience with this. Thanks
PROJECT: 2000 KAWASAKI MULE TRUGGY WITH A 750CC TURBO STREETBIKE MOTOR.