You are not logged in.
- Topics: Active | Unanswered
#271 Re: General Arctic Cat Prowler Discussion » AC tailgate cables » 2010-07-06 11:50:48
The cables that hold up my tailgate are way to long. It came that way. I looked at it and thought that maybe that i could shorten them so i could use it as a seat...ya know , set on the tailgate. Then i thought that maybe the plastic might not support the wieght of 2 adults setting on it. Am i over thinking it? can you buy cables that will allow the gate to hang level/ Help me out guys. Thanks , Dan
Personally before I built and installed the spare tire carrier for my Polaris ranger there was a few times that some people I know used my tailgate as a seat and I had to tell them to get the hell off because it was warping it real bad 
. Mine sits down like A normal truck tailgate and that seems to attract people to use it for A seat :shock: . They are not built for all that weight and since yours sits in the down position I would leave it that way to prevent the temptation for others to use It as a seat :idea: 
.
#272 Re: General Polaris Ranger and Polaris RZR Discussions » Universal joint replacement » 2010-07-05 20:26:55
What model Polaris Is It and what year :?: :?: :idea:
#273 Re: General Polaris Ranger and Polaris RZR Discussions » Instrument panel not working and awd quit at same time any h » 2010-07-05 20:23:56
[font=Verdana:fedf17a7c1] [/font:fedf17a7c1]
Need more information then what you are giving :?: :idea: .
#274 Re: General Polaris Ranger and Polaris RZR Discussions » Sprague Carrier Failure » 2010-06-09 10:28:02
I think I will get one installed as to prevent a failure. Don't want to be the one breaking down...
Let me just note this: It is a lot less time consuming to do it before it comes apart. A lot less messy of a job as well.
With me It is a matter of available $$$$ . At this time things arent going all that well in arnolds state :evil: :evil: .
#275 Re: Ranger and RZR Performance Mods » Original RZR Belt finally went out on me. » 2010-06-06 22:19:01
is the spacer for more low end like the Rhino washer/spacer?
It helps it engage a little faster and smoother. I don't run it because I run a wider belt otherwise I would install it with the stock belt.....
#276 Re: General Polaris Ranger and Polaris RZR Discussions » Sprague Carrier Failure » 2010-06-06 14:40:03
Good post Jared, I never could understand why it was plastic as well. I will contact you when I start having issues with mine but I do not anticipate any issues I hope for a while with mine. I also do not do anywhere near as much rock crawling as you do....
#277 Re: Goin' Riding... Who's with Me? » National ATV jamboree in Fillmore » 2010-06-04 11:27:00
RANGERDALEXP has a point - not just Utah guys either... be more specific. Where the hell is "Bumrush Trail" ???
Well it's over there by "Sissy Point" of course
chournos - I am holding out for UTV jamb (Marysvale, Utah - USA
) too!
I would like to get up American Fork Canyon (Utah) soon. Just a Saturday ride, if anyone is interested we can go find the snow level
Thanks Badley, I thought because I am stuck In California and not a Utah guy I was being Ignored :cry: .
#278 Re: Goin' Riding... Who's with Me? » National ATV jamboree in Fillmore » 2010-06-03 14:28:38
We must all remember that SidexSide forum is not just a Utah site but an international site as well so please include the state that it is in to remove any future confusion :idea: 
.
#279 Re: Goin' Riding... Who's with Me? » National ATV jamboree in Fillmore » 2010-06-03 14:21:15
O.k, I will fill in the blanks on this event .....
National ATV Jamboree
Welcome to Fillmore, Utah's
2010 National ATV Jamboree
1-800-441-4ATV
--------------------------------------------------------------------------------
The 22'nd Annual ATV Jamboree will be on
June 21, 22, 23, 24, 25, 26 2010
For Early Birds, there will be an overnight ride and camp-out on Monday the 22'rd of June! The ride will leave from the pod. All riders are required to bring their own food and gear. The exact route has not been determined yet, but we guarantee it will be great! This ride is limited to the first 25 riders. If you are interested in participating in this ride, please call (435) 759-2543 ASAP or you can register for this ride on the ATV Jamboree registration form.
--------------------------------------------------------------------------------
All Registration forms must be submitted by mail.
Registration:
Registration will be limited to the first 500 riders.
Registration dead line is June 10, 2010.
No refunds after June 1'st, 2010! Registration fees are as follows:
Single Rider Registration
$105.00 without evening meals
$130.00 with evening meals
Couple Rate
$185.00 without evening meals
$235.00 with evening meals
Group of Four
$320.00 without evening meals
$420.00 with evening meals
Additional rider with the group of four
$ 80.00 without evening meals
$105.00 with evening meals
Event fees:
Mud Bog will cost $8.00 per event.
ATV Pull will cost $8.00 per event.
The Kid's 8 to 15 year old Mud Bog & Rodeo games will cost only $2.00 per event, $5.00 for all events, or $20.00 for an entire family.
Registration fees include:
Jamboree Tee-Shirt
Breakfast Everyday
Evening Meals Tue, Wed, Thu & Fri
ATV Information Packet
Trail Map
Gift Packet
Poker Run Entry
6 Days of guided rides
FUN!!!!!
--------------------------------------------------------------------------------
Special Events
Pot Luck / Pizza / Pool Party
Triathlon
ATV Parade
Progressive Dinner
Awards Program, Steak Fry, Poker Prizes
Youth Rodeo
Mud Bogs and ATV Pulls
ATV Give Away
Car, and Craft Show (Subject to change)
--------------------------------------------------------------------------------
There will be Raffle for a New 2010 ATV!!
* Subject to change without notice *
--------------------------------------------------------------------------------
The Old Capitol Car Show and Craft Fair will be held on Saturday the 28'th in the park. (Free to the public)
#280 Re: Goin' Riding... Who's with Me? » National ATV jamboree in Fillmore » 2010-06-03 13:49:03
Is anyone going to the National ATV Jamboree the 21st-26th of June? I'll be there Mon-Thur. Camping at the Adelaide campground by Kanosh.
I would assume you are talking about Fillmore California :?: :?:
If so, see if you can post information on it to get it some attention :idea: .
#281 Re: Teryx Parts and Accessories » HAVE YOU RECEIVED THE MEMO? » 2010-06-03 09:24:54
Thanks for the link, but unfortunately you posted in the wrong section.
He did post it in the wrong section before I moved It here, Anything involving stuff for sale like parts are to be posted in the parts and accessories sections :idea: . Superatv is also trying to promote his website with this news letter and at this time is not a sponsor of SidexSide forum.
#282 Re: The X Spot » help - not sure which to buy » 2010-06-02 19:57:28
Again Titan you have outdone yourself on a great picture .
#283 Re: The X Spot » help - not sure which to buy » 2010-06-02 14:03:07
Personaly I think Arctic Cat should stick to snowmachines, I vote Rhino
Interesting 
#284 Re: General Polaris Ranger and Polaris RZR Discussions » 800xp NOISE » 2010-06-02 08:44:54
Are you sure it is the differential?
I have noticed that the transmission belt engages at about 2,000 RPM. It’s kind of like having a high stall on an automatic transmission car. I don't like it, but it is normal.On the other hand, I did have to replace a $400. Clutch because of "Heat" issues. It did make a bad Clunk when starting out. Apparently it had left noticeable wear marks on the clutch shaft. Make sure you get that checked before your warranty expires. I had to pay for it out of pocket.
They now have an “Updated design” with larger bearings.
Was the belt slipping excessively to cause this heat issue :?: and are you talking about the wear marks on the shaft that the sheaves slide on or was the marks on the sheaves themselves :?: .
#285 Re: General Polaris Ranger and Polaris RZR Discussions » RZR Winch setup » 2010-05-29 20:26:09
Same here I got a multi mount for my Rhino, works on the front or back. My winch rides on the front most of the time.
Best part about a multi mount winch is that if you get extension cables to your battery so you can chain your winch to another object (tree) incase you need to pull from the side. (rollover). Any auto parts store can order battery cables in any length.
If you keep getting more toys listed at the bottom of your post we will need to talk about you getting your own web site :idea: .
You forgot to list the JLG lift you have .