Hopefully our rocks wont all burn up for our Nov ride! 

http://www.ksl.com/?nid=148&sid=4591054

I hope everyone down there is safe and they get the fire put out real soon.

Is there a link or something from polaris stating the extended warranty? I have not received anything by mail and I have not been able to find it on the web.

Thanks!

That is great news and info RedMan.    Im sure like you said it may take awhile but lets atleast be glad that they are working on it.    For those wanting to look to see if their state has been added to the list where will they need to look?

WHAT? Your not going to try to sue Polaris like everyone else? lol  :shock:  Glad to see ya admit it was your fault and not polaris. 

Hope it heals well and hope you can make it to Moab.

One of my complaints after installing the SIMPSON 5 point harness set up on my RZR was how they would slide back and forth on the harness bar. I put a little thought into a fix for this and came up with a few ideas. The following is what I chose to do on my RZR and not only does it look good it serves its purpose very well and is very cost effective.

You can pick these up at your local hardware store. They come in different depths and lengths.

This is the length I chose for the size of harness that I run.

Holding a tape measure on the roll cage like below measure over 3" and mark - This is where your first hole for your first harness stay will be located.

Next, holding the tape measure in the same location measure over 14" and mark - This is where your 1st hole for your 2nd harness stay will be located.

Hold up your harness stay to the location of your 1st mark. Have the 2nd hole toward the middle of the machine away from your mark. Place harness stay on the tube toward the bottom and mark both holes (I used a sharpie). Repeat for the 2nd one that you marked at 14" with the second hole away from your mark toward the midde of your machine. Mark holes.

With a punch or a nail, tap on your marks to create a indent to keep your screws from slipping off of the tube.

Self tappers like below work great.

Install harness stays with the self tappers. Should look like this when done.

With harness installed.

Repeat for the other side. Using the same measurements noted above.

THE RESULTS WILL BE A NICE CLEAN LOOK. No more sloppy harnesses!

I used this same process on a stock RZR cage as well as my new FERG FAB cage.

-JARED

UPDATED LIST~

Badley (Poison Spider Mesa, Hells Revenge, Fins-n-Things, Moab Rim)
Fasttrax
Chris (ravencr)
66cummins
RedMan (night run through Hidden Canyon)
RMD (Poison Spider, Moab Rim, Golden Spike, Hells Revenge, Behind the Rocks, Metal Masher, Steel Bender)
Mr. Kryptonite (Hells Rvenge, Golden Spike, Poison Spider)
sandahauler (bringing his jeep)
cmoscharlie
MIKE & FRIENDS, 2 additional rigs not members of the forum (I talked to them on the phone)

I will take some pictures for you of my rzr when I get the mud washed off from my crazy weekend and post the pix along with some info on how I did it. IMO 5 points are the only way to go and I highly recomend paying the little extra for the padding. You will love them!